氧化铝载体下二氧化氯催化氧化处理印染废水

研究了二氧化氯化学氧化体系和二氧化氯催化氧化体系。实验结果表明:单用二氧化氯化学氧化处理COD为2700mg/L的活性艳红染料配制废水时,最佳反应pH值为10,氧化剂经济用量为800mgClO2/L废水,反应时间为30min,COD去除率可达63%左右,氧化指数(COD削减量∶ClO2投加量)=2.18。当二氧化氯与自制催化剂所组成的催化氧化体系用于对活性艳红染料配制废水的处理时,最佳反应pH值为10左右,氧化剂经济用量为1000mgClO2/L废水,反应时间为90min,COD去除率可达83.4%,氧化指数=2.25。结果表明,二氧化氯催化氧化法是一种新型高效的处理难降解废水的技术,有着广阔的应用前景。     

液氯泄漏事故模拟分析

针对1996年1月21日在西班牙发生的一起液氯泄漏事故的后果进行了模拟分析。模拟分析结果同事故实际所造成的后果是一致的。表明采用基于数学模型的事故后果模拟分析具有一定程度的可靠性。对于救灾和对重大危险源编制应急事故预案有一定程度的指导意义。     

一个研究街道峡谷流场及浓度场特征的三维数值模式

目前，研究街道峡谷内流场及机动车排放污染物的扩散行为特征所采用的主要方法为：采用野外测试法和物理模拟法，而采用三维数值模拟方法研究此问题的工作很少。本文创建了一个研究微尺度街道峡谷内流场及机动车排放污染物扩散特征的三维数值模式，即首次采用伪不定常方法，利用K——E闭合方案，建立了一个模拟城市街道峡谷内流场及污染物扩散特征与街道峡谷风场、街道几何结构及两侧建筑物高度对称性之间的复杂关系的三维数值模式。经过与实际监测资料及风洞实验对比，结果表明此三维模式具有较好的模拟精度，能够很好模拟峡谷内的风场及街谷几何结构对街道峡谷内流场及浓度场特征的影响，有很强的实用性。     

BUILDUP,WASHOFF, AND EVENT MEAN CONCENTRATIONS1

ABSTRACT: Most watershed water quality simulation models require the user to specify pollutant buildup and washoff rate parameters for pollutants, by land use. Buildup and washoff rates are difficult to measure directly, and only limited guidance and few observed data are available from the literature. Many studies, however, report storm event mean concentrations (EMCs). These EMCs must arise as a result of the buildup and washoff processes, but typically represent the net contribution from a variety of pervious and impervious surfaces. This paper explores the relationship between EMCs and buildup/washoff parameters. An assumption of the mathematical form of the buildup/washoff relationship gives an algebraic expression for the EMC consistent with model assumptions. This yields techniques to separate observed EMCs into contributions from different land uses and from pervious and impervious surfaces. Given this relationship, numerical optimization may be used to estimate site specific values of buildup and washoff parameters from observed storm EMCs for use in modeling. Use of this approach helps ensure that model parameters are consistent with observed data, providing a rational starting point for final model calibration. Several site examples demonstrate use of the method.     

Effect of soil solids concentration in batch tests on the partition coefficients of organic pollutants in landfill liner-soil materials

 The effect of the soil solids concentration in batch tests on the measured values of the partition coefficient (K _p) of organic pollutants in landfill liner-soil material was investigated. Since this study was based on the results of batch and column tests conducted independently, there were limitations to the conclusions derived. The organic compounds tested were benzene, methylene chloride, toluene, trichloroethylene, and p-xylene. The results of this study showed that as soil solids concentrations increased, the measured K _p values of these organic compounds strongly decreased. The observed values of K _p stabilized when the soil solids concentration was above a certain value. Typical K _p values obtained from batch tests conducted under high soil solids concentrations were close to those obtained from column tests. It was concluded that the K _p values of organic compounds measured under low soil solids concentrations, i.e., less than 100 g/l, may not correctly simulate the field situation. Consequently, the values of K _p obtained with low soil solids concentrations can result in an overestimation of the retardation factor of the landfill liner material. Received: March 14, 2002 / Accepted: August 25, 2002     

80m烟囟排放放射性气溶胶连续自动监测

本文介绍采用德国进口的ＬＢ９１００Ｄ监测系统对８０ｍ烟囟排放的α放射性气溶胶浓度进行连续、自动监测。并与国产ＦＪ－３６７，ＦＨ－４６３Ａ装置进行了对比则量，两套装置的测量结果符合得较好。     

氯气泄漏扩散半径估算与应急处置

氯气泄漏是常见的化学事故之一.通过对氯气的理化性质、危险特性和泄漏原因分析,估算氯气泄漏的扩散半径,同时以扩散半径作参考,提出氯气泄漏的应急处置措施,为氯气泄漏事故应急处理提供技术支持.     

仪化热电厂提高循环水浓缩倍率的措施

针对仪化热电厂将循环水用作冲灰水，导致浓缩倍率只有1.6，以及凝汽器铜管腐蚀结垢严重等问题，提出了隔断循环水与冲灰水的直接联系，实现闲路循环，对凝汽器铜管进行酸洗，并对循环水实施加缓蚀阻垢荆、杀菌剂和旁流过滤等办法，全部实施后产生了很好的效益，值得借鉴。     

大气污染物最大落地浓度计算方法的比较

大气环境影响评价工作中，采用有风点源扩散模式定量预测大气污染物的最大落地浓度，通常有轴线法、常数法和非常数法这三种计算方法。本文通过实例对上述三种计算方法进行比较分析，明确了各自的适用范围，其中以轴线法的应用最为全面。     

核事故中放射性核素扩散浓度的理论预测

在高斯烟羽模型的基础上,对核事故中放射性云团在大气中的扩散规律进行了研究。利用倾斜烟团模式,考虑实际过程中核素粒子的重力沉降、雨洗作用以及放射性衰变等因素的影响,提出一种迅速估算放射性核素扩散浓度的方法。该方法可计算核事故中连续点源和瞬时点源在不同气象、地形条件下的浓度分布,并可获得地面的干沉积率和湿沉积率。放射性核素浓度的确定是放射性事故抢险救援和辐射防护等工作的基础和前提,是放射性事故应急救援的重要组成部分。该结果在核事故的应急救援过程中,对救援人员划定警戒区和确定周围居民的疏散范围具有重要意义,并可为制定救援方案和应急决策提供科学依据。